Classic Bally / Stern LED adapters View larger

Online only

Classic Bally / Stern LED adapters

MA-07

New product

Adapters to LED's in your classic Bally / Stern's machines.  No soldering, no crimping, no tools required.  Converts your existing main lamp driver board to be LED compatible so you can use any pinball LED's on the market. Converts only the main lamp driver board,  but not an AUX lamp board if present. 

More details

14 Items

In Stock

$45.00

More info

These adapters will allow you to use LED's in your classic Bally / Stern's with -17, -35, M-100 and M-200 CPU board sets.  No soldering, no crimping, no tools required.  It converts your existing main lamp driver board to be LED compatible so you can use any pinball LED's on the market.

As pinball machines can sometimes change hands pretty rapidly, this adapter set is just as quick and easy to remove.  No permanent modifications are made, so it preserves resale and collectability of very clean and original machines. 

ALTEK main lamp driver boards do not require an LED adapter, only factory original main lamp drivers require LED adapters.

Some Bally titles use additional boards to control more lamps, and require additional adapter set(s) to completely convert a game. 

Spectrum:  Requires 2 of this set

Space Invaders, Xenon, Flash Gordon, Eight Ball Deluxe (All versions), Fireball II, Embryon, Fathom, Medusa, Elektra, Vector, Speakeasy, Mr. and Mrs PacMan:    Require 1 of this set, and one the -52 AUX board sets.

http://www.siegecraft.us/presta/index.php?id_product=63&controller=product&id_lang=1

Kiss,  Future Spa,  Centaur, Centaur II:  Require 1 of this set and one of the -42 AUX board sets

http://www.siegecraft.us/presta/index.php?id_product=62&controller=product&id_lang=1

Does NOT work in Gold Ball,  Baby Pacman, Granny and the Gators, or Grand Slam.

Troubleshooting Addendum:

Some customers report issues where the adapters either don't work at all, or actually make the strobing problems even worse.  This seems to be caused by one of two issues.

1:  Check continuity on the wiring harness.   I have had issues the past year or so with my wire processing equipment, resulting in bad crimps,  and potentially a bad spool of wire too.  

2: Check the voltage on the spot you're attaching the alligator clip.   It should be around 5.5v to 6v,   if it's 3v-4v,  it's way too low and the adapters won't work there.   Check other lamp locations either in the backbox or even under the playfield.

Reviews

No customer reviews for the moment.

Write a review

Classic Bally / Stern LED adapters

Classic Bally / Stern LED adapters

Adapters to LED's in your classic Bally / Stern's machines.  No soldering, no crimping, no tools required.  Converts your existing main lamp driver board to be LED compatible so you can use any pinball LED's on the market. Converts only the main lamp driver board,  but not an AUX lamp board if present. 

Customers who bought this product also bought:

6 other products in the same category:

Download

MB-07 Instructions

Installation instructions for MB-07-011 Bally / Stern LED adapters

Download (72.72k)