These are the home grown products that form the core of the lineup. Simple and easy to use diagnostic tools for use on solid state pinball machines.
Budget switch matrix tester, giving an input for 8x8 switch matricies. Compatible with any pinball machine using an 8x8 or smaller switch matrix layout. Includes dedicated jumper for Williams WPC machines. Pre-assembled wiring harness Included! Just choose from System 3-7, System 9-11, or WPC. Current version almost sold out. New version on the way.
VERY handy tester piece, designed for a quick and definitive test of Bally / Williams flipper opto boards used in WPC Fliptronics machines. Works with factory Type 1, Type 2, and aftermarket opto boards. Tester board is shipped fully assembled, just needs you to assemble the small wiring harness.
Quick plug-in board that gives you push buttons and switches to operate your diagnostic inputs. Works with System 3 through System 11, to act as substitutes for your coin door diagnostic switches. Very handy little board, particularly for bench testing.
New ones are here, a couple available for now, more parts on the way. Lamp matrix simulator board. These simulate the playfield lamp matrix using a toolbox friendly 8x8 LED matrix, allowing you to quickly isolate a controlled lamp problem. Compatible with Williams System 3 through to WPC-95, Data East. Limited compatibility with Sega/Stern 'Whitestar' and...
Latest version of the always popular replacement boards for drop target sliders. Now sized to fit better, and with cleaner surface mount parts that are pre-soldered for the game you need! Simply order the number you need, and in the comments tell me which game its for. Priced PER TARGET. Only a few left in this run but more on the way soon.
.900 sized brass game tokens, with the official Siegecraft Electronics logos. New and un-circulated. Price for a package of 10. Shipping notice: Customers outside the US will receive a separate bill for additional shipping. They are simply too heavy and expensive to ship with the normal prices, and will have to be calculated for each individual sale.
Solenoid output test board for Williams System 3 through WPC-95, plus Data East, Sega/Stern Whitestar. Checks the status of your solenoid outputs, but also many other logic outputs such as displays and sound headers. New version with much cleaner, easier to read, and easier to access layout.
Special solenoid circuit tester board for Williams System 3 through early System 11, and early Data East. Allows for easy bench testing, eliminates need for cumbersome test leads. Comes pre-assembled, ready to use upon arrival. New 2017 version, with just the right number of buttons. Much easier to use.